9.10 Maintenance Menu; How To Enter The Maintenance Menu; Print Menu - Konica Minolta bizhub C30P Service Manual

9. Menu

9.10 MAINTENANCE MENU

9.10.1

How to enter the MAINTENANCE MENU

A. Procedure
1. Display [MAINTENANCE MENU] on the menu screen and press the Menu/Select key.
2. [ENTER PASSWORD] message is displayed.
3. Set the first digit of user password with the up key /down key
key .
4. Repeat the above procedures to set up to fourth digit of password.
(The initial setting for user password is [0000].)
5. Press the Menu/Select key.
B. Exiting
• Press the Cancel key.
9.10.2

PRINT MENU

A. EVENT LOG
Function • Prints the event log.
• To check the jams/troubles that occurred, and history of replacing the consumables,
etc.
The items that can be checked are as follows.
Paper Jam Error
Engine Fatal Error : The history of troubles which caused service call
Use
Fuser Unit
Transfer Belt
Second Trans
Toner Cartridge
Imaging Unit
Trouble Counter
Setting 1. Select [EVENT LOG] and press the Menu/Select key.
/procedure 2. Select [PRINT] and press the Menu/Select key.
B. HALFTONE 64
Function • Prints the halftone pattern with 25 % level for CMYK respectively.
Use • To check the unevenness of the density and the pitch.
Setting 1. Set the A4S or letterS media on the tray.
/procedure 2. Select [HALFTONE 64] and press the Menu/Select key.
3. Select desired color with the up key /down key
4. Select [PRINT] and press the Menu/Select key.
156
: The number of jams occurred and its history
: The history of replacing the fusing unit
: The history of replacing the transfer belt
: The history of replacing the transfer roller
: The history of replacing the toner cartridge
: The history of replacing the print unit
: Troubles counted at each section
Field Service Ver. 2.0 May 2007
and press the right
and press the Menu/Select key.