Konica Minolta bizhub C30P Service Manual page 150

Field Service Ver. 2.0 May 2007
D. Coverage Information
• Each coverage information is calculated and displayed based on the description shown
in the following table.
<Coverage information list>
Coverage information
Normalized Coverage
Information <Latest Job>
Normalized Coverage
Information
<Current Toner Cartridge>
Normalized Coverage
Information <Total>
Normalized Color (CMYK)
Coverage Information
Normalized Monochrome
Coverage Information
NOTE
• Coverage information can be used as a guide and may not completely reflect the
actual amount of toner used.
• Individual average dot coverage of four colors (YMCK) in the last
job is calculated on an A4 basis.
(The average of the ratios of dot space on each page when the
printable area is defined as 100% and shown in 0.1 percent incre-
ments)
• Individual average dot coverage of four colors (YMCK) in the cur-
rent toner cartridges is calculated on an A4 basis.
(The average of the ratios of dot space on each page when the
printable area is defined as 100% and shown in 0.1 percent incre-
ments)
• Individual average dot coverage of four colors (YMCK) is calculated
on an A4 basis for all prints performed after the printer was
installed.
(The average of the ratios of dot space on each page when the
printable area is defined as 100% and shown in 0.1 percent incre-
ments)
• Average dot coverage is calculated on an A4 basis for full color
printing performed after the printer was installed.
(The average of the ratios of dot space on each page when the
printable area is defined as 100% and shown in 0.1 percent incre-
ments)
• Average dot coverage is calculated on an A4 basis for monochrome
printing performed after the printer was installed.
(The average of the ratios of dot space on each page when the
printable area is defined as 100% and shown in 0.1 percent incre-
ments)
Contents
9. Menu
113