Finishing; Job Separation; Image Rotation - Konica Minolta bizhub C30P Service Manual

Field Service Ver. 2.0 May 2007
9.4.5

FINISHING

Function • Selects an exit tray and finishing option at the staple finisher.
• To select an exit tray and finishing option when a optional staple finisher is installed.
SUB TRAY
MAIN TRAY
Use
OFFSET
STAPLING
Setting • The default setting is MAIN TRAY.
/procedure
SUB TRAY
NOTE
• This menu is available only when a staple finisher option is installed.
• The setting in the printer driver overrides the setting in this menu.
• OFFSET and STAPLING functions are available only for the following media
types and media sizes.
Media type: Plain/Recycled/Letterhead paper
Paper size: 182 to 216 mm in width and 257 to 356 mm in length
• 2 to 30 sheets of paper can be stapled at a time.
9.4.6

JOB SEPARATION

Function
• Selects whether or not to use a shift function for each job that prints to the staple fin-
isher.
Use
Setting • The default setting is OFF.
/procedure
NOTE
• This menu is available only when a staple finisher option is installed.
• This setting is disabled when "SUB TRAY" or "STAPLING" is selected for [FIN-
ISHING].
• This function is available only for the following media types and media sizes.
Media type: Plain/Recycled/Letterhead paper.
Paper size: 182 to 216 mm in width and 257 to 356 mm in length
9.4.7

IMAGE ROTATION

Function • Prints 180 degrees rotated images.
• To exit the leading edge of a printed image first during printing when an optional sta-
Use
ple finisher is not installed.
Setting • The default setting is OFF.
/procedure
NOTE
• This menu is available only when an optional staple finisher is not installed.
: Printing to the sub tray
: Printing to the main tray
: The media is fed to the main tray with each copy slightly shifted.
: Each copy is stapled and fed to the main tray.
(When the collate function is selected, each set of copy is stapled.)
"MAIN TRAY" OFFSET
ON
ON
9. Menu
STAPLING
"OFF"
"OFF"
121