– Screw out the bolts -A- (tightening torque 2 Nm).
– Detach the coolant pipes:
♦ Pipes -C- to passenger side heat exchanger
♦ Pipes -D- to driver side heat exchanger
Note
Replace the O-rings -B-.
♦
Moisten both O-rings with coolant before fitting.
♦
Insert the rubber bushes -E- in the pump valve unit and in the
♦
holder -F- as shown.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
5. Components for control and regulation of air conditioner not located in passenger compartment
Audi A8 2003 ➤
Air conditioning - Edition 09.2010
59