Audi Air conditioning 2003 A8 Workshop Manual page 150

Audi A8 2003 ➤
Air conditioning - Edition 09.2010
– Pull off the rubber seal -1- and detach the plenum chamber
covers -2- and -3-.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
– Screw out the rear bolts -3- for the body brace.
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Secure the adapters -10 - 222 A /21- at the suspension strut
domes without the cross-piece.
• The supports are marked for the left and right side of the ve‐
hicle.
• The centre resting point -2- of the supports is positioned on
the front bolts for the body brace.
• The adapters -10 - 222 A /21- are secured with the rear bolts
-3- for the body brace.
• The knurled screw -1- must be screwed down such that the
support plate rests on the suspension strut dome.
– Fit the cross-piece with 2 adapters -T40093/6- at the adapters
-10 - 222 A /21- .
– Secure the spindles -10 - 222 A /11- at the engine lifting eyes.
– Pretension the engine slightly with the spindles of the support
bar.
– Screw out the bolts -1- and -2- for the anti-roll bar mount on
the left and right.
144
Rep. gr.87 - Air conditioning system