Audi Air conditioning 2003 A8 Workshop Manual page 195

1 - Seal
2 - Air duct
❑ With shut-off flaps
❑ Air duct to right chest
vent and for indirect
ventilation of dash panel
on right
❑ Do not dismantle
3 - Oval head self-tapping
screw
4 - Lever
❑ Not to be removed (dan‐
ger of interchange)
❑ Heed assignment (code
number „862")
5 - Lever
❑ Not to be removed (dan‐
ger of interchange)
❑ Heed assignment (code
number „861")
6 - Cam plate
❑ Mark prior to removal to
avoid interchange
❑ Heed assignment (code
number „154")
7 - Holder
❑ Mark prior to removal to
avoid interchange
❑ Heed assignment (no
code number)
8 - Oval head self-tapping
screw
9 - Front right defroster and chest vent shut-off flap control motor -V199-
❑ With potentiometer -G317-
❑ Removing and installing
10 - Oval head self-tapping screw
11 - Seal
12 - Seal
13 - Air duct
❑ With shut-off flaps
❑ Air duct to left chest vent and for indirect ventilation of dash panel on left
❑ Do not dismantle
14 - Lever
❑ Not to be removed (danger of interchange)
❑ Heed assignment (code number „863")
15 - Cam plate
❑ Mark prior to removal to avoid interchange
❑ Heed assignment (code number „155")
16 - Holder
❑ Mark prior to removal to avoid interchange
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
⇒ page 99
Air conditioning - Edition 09.2010
15. Dismantling and assembling air conditioning unit
Audi A8 2003 ➤
189