Audi Air conditioning 2003 A8 Workshop Manual page 164

Audi A8 2003 ➤
Air conditioning - Edition 09.2010
– Screw out the bolts -arrows- and detach the engine support.
– Detach the inlet hose.
– Screw out the banjo bolt -2- for the pressure pipe.
– Remove the coolant hose -arrows- and move the coolant pipe
upwards.
– Use an open-ended wrench to hold the compressor drive shaft
-A- in position and turn the compressor drive unit -B- in the
-direction of arrow C-.
Note
The compressor drive shaft -A- is not to be turned.
♦
After unfastening the screw connection, the compressor drive
♦
shaft -A- can be pushed through the socket -E- into the drive
gear.
158
Rep. gr.87 - Air conditioning system
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.