Audi Air conditioning 2003 A8 Workshop Manual page 123

– Before fitting the glove compartment, driver side storage com‐
partment and plenum chamber cover, check the position of the
sockets -C- and -D- in the coolant pipe penetration to the ple‐
num chamber.
– Before fitting the glove compartment and driver side storage
compartment, check the cooling system for leaks: ⇒ Engine,
mechanics; Rep. gr. 19
– Perform the remaining installation operations in the same
manner as described for fitting of the front passenger side heat
exchanger ⇒ page 112
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
.
9. Removing and installing heat exchanger of air conditioning unit
Audi A8 2003 ➤
Air conditioning - Edition 09.2010
117