Audi Air conditioning 2003 A8 Workshop Manual page 190

Audi A8 2003 ➤
Air conditioning - Edition 09.2010
1 - Oval head self-tapping
screw
2 - Cover
3 - Bolt
4 - Air flow flap control motor -
V71-
❑ With potentiometer -
G113-
❑ Removing and installing
⇒ page 45
5 - Connecting element
❑ Mark prior to removal to
avoid interchange
❑ Heed assignment (code
number „063")
6 - Oval head self-tapping
screw
7 - Intake housing
❑ Removing and installing
⇒ page 42
❑ Dismantling and assem‐
bling ⇒ page 186
❑ Sealing joints
⇒ page 42 (removing
and installing intake
housing)
8 - Air flow flaps
❑ Removing from intake
housing ⇒ page 186
9 - Holder
10 - Oval head self-tapping
screw
11 - Oval head self-tapping screw
12 - Ring for air duct
❑ Left side
13 - Air duct for fresh air blower
14 - Ring for air duct
❑ Right side
15 - Fresh air intake duct temperature sensor -G89-
❑ Removing and installing
16 - Holder for fresh air blower
17 - Bolt
18 - Cover
❑ Seal connection between air conditioning unit and cover with black silicone adhesive sealant -D 176 001
A3- ⇒ page 47
❑ A modified cover for the control motor (with 4 instead of 2 attachment points)
adapted cover with air recirculation flap and a wiring harness with a modified socket at the wiring harness
to the air recirculation flap control motor was gradually introduced as of 12.2003. ⇒ Electronic parts
catalogue
19 - Air recirculation flap control motor -V113-
❑ With potentiometer -G143-
184
Rep. gr.87 - Air conditioning system
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
⇒ page 47
⇒ page 47 , a suitably