Audi Air conditioning 2003 A8 Workshop Manual page 153

– Tighten the bolts -arrows-.
• Tightening torque: 25 Nm.
– Plug in the connector -1- at the air conditioner compressor
regulating valve -N280- .
Note
Check that there is sufficient clearance between the refrigerant
lines and the corresponding holders and the other components.
– Attach the refrigerant lines
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
⇒ page 138 .
Audi A8 2003 ➤
Air conditioning - Edition 09.2010
13. Servicing refrigerant circuit
147