Table of Contents
Advertisement
Available languages
Available languages
- Quick Links:
- Installation
- Troubleshooting
- Replacement Parts
- Parts
Hide quick links:
Advertisement
Chapters
Table of Contents
Advertisement
Advertisement
Need help?
Do you have a question about the MNSD2TPA and is the answer not in the manual?
Questions and answers
Propane gas assembly specs and setup Instructions
The ProCom MNSD2TPA heater operates with propane gas and has the following specifications:
- BTU Output: 10,000 BTU
- Regulator Pressure Setting: 10 inches of water column (c.a.)
- Gas Inlet Pressure:
- Maximum: 14 inches of water column (c.a.)
- Minimum: 11 inches of water column (c.a.)
- Ignition Type: Piezoelectric
For setup and installation:
- Ensure the heater is equipped for propane gas use.
- Follow the installation instructions in the manual.
- Do not attempt field conversion between gas types.
- Installation and service must be performed by a qualified installer, service agency, or gas supplier.
- Follow safety precautions, including avoiding the use of flammable vapors near the unit.
This answer is automatically generated