PFS
®
US
ADVERTENCIA: si la información contenida en este
manual no se sigue al pie de la letra, se puede producir un
incendio o una explosión que podría ocasionar daños a
la propiedad, lesiones personales o la pérdida de la vida.
- No guarde ni utilice gasolina u otros vapores y líquidos
inflamables cerca de este aparato ni de cualquier otro.
- QUÉ HACER SI PERCIBE OLOR A GAS
• No intente encender ningún aparato.
• No toque ningún interruptor eléctrico; no use ningún
teléfono en el edificio.
• Llame inmediatamente a su proveedor de gas desde
el teléfono de algún vecino. Siga las instrucciones
del proveedor de gas.
• Si no puede localizar al proveedor de gas, llame al
departamento de bomberos.
- La instalación y el servicio deben ser realizados por
un instalador capacitado, una agencia de servicio o el
proveedor de gas.
¿Preguntas, problemas, piezas faltantes? Antes de volver a la tienda, llame a
nuestro Departamento de Servicio al Cliente al 1-866-573-0674, de lunes a viernes de
7:30 a.m. a 4:15 p.m., Hora del Centro, o envíe un correo electrónico a
CALENTADOR DE GAS DE
MNSD3TPA-BB MNSD5TPA-BB
aparato está equipado para
funcionar con gas (natural
y propano). No se permite
convertir más que a gas
natural o gas propano.
customerservice@usaprocom.com.
PARED SIN VENTILAS
MANUAL DE
FUNCIONAMIENTO E
INSTALACIÓN DEL
PROPIETARIO
INFRARROJO MODELOS
MNSD2TPA, MNSD3TPA,
MNSD5TPA
ADVERTENCIA: Este
Need help?
Do you have a question about the MNSD2TPA and is the answer not in the manual?
Questions and answers
Propane gas assembly specs and setup Instructions
The ProCom MNSD2TPA heater operates with propane gas and has the following specifications:
- BTU Output: 10,000 BTU
- Regulator Pressure Setting: 10 inches of water column (c.a.)
- Gas Inlet Pressure:
- Maximum: 14 inches of water column (c.a.)
- Minimum: 11 inches of water column (c.a.)
- Ignition Type: Piezoelectric
For setup and installation:
- Ensure the heater is equipped for propane gas use.
- Follow the installation instructions in the manual.
- Do not attempt field conversion between gas types.
- Installation and service must be performed by a qualified installer, service agency, or gas supplier.
- Follow safety precautions, including avoiding the use of flammable vapors near the unit.
This answer is automatically generated