Parameters of the Type of Imprint
The table below indicates the type of imprint to choose, depending on the type of
process you want to apply to each set of mail.
The column on the right indicates, for each type of imprint, the parameters you can
set before printing mail.
The mailing system uses default values defined as supervisor.
3
Type of process
Apply postage to outgoing
mail
Re-date a mail piece
Correct the amount on a
mail piece (print on back of
envelope)
Print 'Received' and/or the
date on incoming mail
See also
To set default values as supervisor: see
•
26
Type of imprint
[Standard ]
[Correction date ]
[Amount correction
]
[Received ]
By default, the system selects the [Standard ] type of imprint at
start-up.
Parameters
Rate
•
Weight
•
Date format
•
Slogan (optional)
•
Text (optional)
•
No weight, postage amount
•
= 0
Date format
•
Manual amount of postage
•
Date format
•
Printing date and/or 'Slogan
•
Received ' .
Configuring your Mailing System
p.121 .