Time And Date Management; How To Check/Adjust The Machine Time And Date - Hasler im-280 User Manual

Time and Date Management

9.12 Time and Date Management

Daylight Savings Time Transitions
The mailing system normally auto-adjusts to Daylight Savings Time . However, if a
manual adjustment is necessary, you can use either of the following procedures to
correct the mailing system time:
As user:
•
As supervisor:
•
Time and Date Setting
The time and date are required for postage and are provided by the postal au-
thorities. As a result, you cannot manually adjust the system time and date.
However, you can ask the system to check the current time and date and display
them.
See also
9 Re-dating Mail
•
Automatic Date Advance
•

How to Check/Adjust the Machine Time and Date

How to Check/
Adjust the
Machine Time
and Date
148
How to Unlock the Meter
How to Check/Adjust the Machine Time and Date
p.38 .
p.139 .
To check the time and date, make sure the connection to the
Postal Services is available. See
Services Connection
To check/adjust the current time and date:
1
As supervisor (see
Press
> Machine settings > Date and time
2
Select Audit call to adjust the time.
The system adjusts its time if necessary and displays time
and date values.
If the clock adjusts backwards for 'Daylight savings time', the
mailing system will wait until last postage printing time before
allowing you to process new mail.
p.67
How to Select a Postal/Online
p.145 .
How to Log in as Supervisor
and type 6.3 or select the path:
p.148 below.
p.124 ):