Maintenance Processes; How To Run The Installation Wizard - Hasler im-280 User Manual

Maintenance Processes

11.2 Maintenance Processes

These processes are only to be completed on request from by Customer Service.
Check that your mailing system is connected to the LAN or to a telephone line before
starting.
As supervisor (see
Press
> Maintenance > Processes
1 Installation Process
Installing a mail system for the first time.

2 Disable base
Disable base from service.

Prepare base for removal by saving data on USB key.

3 Swap base
Install a replacement base.

4 Withdraw a PSD
Remove PSD from service.

Requires a password from Customer Services to perform.

11
5 Swap PSD
Allows installation of a new PSD in mail system. Old PSD must have already

been withdrawn.
6 Update registration
This procedure is used if you have changed your address.

Contact your Customer Service to change your information then you will be in-

structed to perform the update registration procedure.
Running the Installation Wizard
This type of call should only be completed upon request from Customer Service.
Check that your mailing system is connected to the LAN or to a telephone line before
starting.

How to Run the Installation Wizard

How to Run the
Installation
Wizard
174
How to Log in as Supervisor
and type 7.4 or select the path:
To run the installation wizard:
1
As supervisor (see
Press
> Maintenance > Processes
A confirmation message is displayed.
p.124 ):
How to Log in as Supervisor
and type 7.4 or select the path:
p.124 ):