Hasler im-280 User Manual page 45

If a mail piece is bigger than mail path maximum thickness (see
Mail Specifications
p.185 ), you can print on a label instead.
These are supplied by your local reseller.
The mailing system applies the imprint on the mail piece.
In Standard weighing
rectly on mail pieces from the [Standard ] home screen:
1
Put the mail piece on the
Scale.
The weight of the mail
piece is displayed in the
Weight
area of the
home screen and the
postage amount
updated.
2
Withdraw the envelope
from the Scale and insert
it into the system, with
the side to be printed
facing upwards.
If a mail piece is bigger than mail path maximum thickness (see
Mail Specifications p.185 ), you may print on a label instead.
The mailing system applies the imprint on the mail piece.
When you put a mail piece on the Weighing Platform, the weight
value is saved when you remove it. You can then print a batch of
similar mail pieces (same weight) without weighing them each. To
print a batch of mixed mail pieces (different weight), you need to
weigh each mail piece before printing.
mode , you can print postage di-
is
3
37