Power Management; How To Switch To 'Sleep' Or 'Wake' Mode - Hasler im-280 User Manual

Power Management

2.4
Energy Star® Compliance
2
Your mailing system is an Energy Star® qualified mailing system that automatically
goes into a low-power 'Sleep mode ' after a period of inactivity.
The mailing system automatically switches to 'Sleep mode' after 30 minutes of non-
activity. You can change this default setting in supervisor mode. You can also switch
to a low-power mode by pressing the Sleep/Wake button.
A very-low-power sleep mode called 'Soft off mode ' is also available. This mode
should only be used for long periods of non-use of the system. In this mode, the
system takes longer to wake up and the automatic postal updates cannot take place.
See also
To change the low-power modes time-outs, see:
•
out' (User)

How to Switch to 'Sleep' or 'Wake' Mode

How to Switch to
'Sleep' or 'Wake'
Mode
20

Power Management

p.127 .
1
Press
- A short press on the Sleep/On/Soft off mode button sets the
system to 'Sleep' mode.
- A long press on the Sleep/On/Soft off mode button sets the
system to 'Soft off '.
- The light located next to the key indicates:
- Green : the mailing system is in
use.
- Amber (continuous) : the mailing system is in
(low-power mode).
- Amber (blinking) : the mailing system is in
(very-low-power mode).
To avoid weighing errors, make sure the Scale is clear when
waking up the system. If the system does not seem to display a
correct weight, see
How to Change the 'Sleep time-
to switch between 'Sleep' and 'Wake' modes.
Weighing Problems
Awake mode and ready for
Sleep mode
Soft off mode
p.179 .