Table of Contents
Advertisement
92 Main Menu
mode), you pick up the call. The subscriber for whom you
pick up the call must belong to a user group for which the
"Call seizure" authorisation is activated, otherwise "Pickup
selective" is not possible.
If the called subscriber is a member of a user group for
which pickup protection is active, then you cannot pick up
calls to this subscriber's number.
3ƒUnpark call
■
(please also refer to MenuCard "Conversation" starting on
page 46).
2ƒDial
Select
followed by ...
1ƒAnnouncement
■
can initiate an announcement on another system tele-
phone. Under Dest.: enter the call number. Announce-
ments can also be directed to call numbers at which several
callers can be reached (see also Announcements (with
and without Intercom) starting on page 70).
2ƒIntercom
: Use this function to initiate an announce-
■
ment to a single system terminal, The microphone of the
system terminal will be switched on and the person you are
calling can immediately answer your announcement with-
out having to press a button. Enter the device ID of the termi-
Device-ID:
nal for
device IDs, speak with your system administrator.
If the person called belongs to a user group which has
active "announcement protection", no announcements are
made (with or without intercom) to this person's call
number.
3ƒDoor opener
■
4ƒPhone book
■
page 61).
5ƒNote
: Note a telephone number and name or dial a pre-
■
viously noted phone number.
6ƒSuppress number
■
transmitted to the caller for the subsequent conversation.
This menu item depends on the system settings.
: "Unparks" a previously parked caller
: After entering the call number, you
. For information on the existing
: This activates the door opener.
: This opens the telephone book (see
: Your telephone number is not
Features and MenuCards
Advertisement
Table of Contents
