Table of Contents
Advertisement
Features and MenuCards
tion entitled Programming Functions (Features) starting on
page 103), you can in addition enter a
The label is displayed for informational purposes in the Config-
urator of the Comfort Pro S/T-Comfort 930 DSL, for example.
You activate call forwarding with
Immediately
(
sign. This is followed by the call forwarding destination. Using
the plus/minus key
warding.
2ƒDivert key
more than one trunk key is configured on your telephone. In this
case you can configure call forwarding for each trunk key indi-
vidually. From the list you select the key to which the internal tel-
ephone number is assigned and which you want to forward.
The procedure is otherwise the same as that for configur-
ing the "Divert phone" function (see the previous sec-
tion).
3ƒDivertƒMSN
bers supplied for the multi-terminal access) you want to forward.
Several MSNs can be grouped together. (This is configured by
the system administrator.) Calls to the group of MSNs can be for-
warded to a common destination number. Selecting the
menu itemlets you forward all configured MSNs to the same
destination number.
You need the relevant authorisation to forward MSN groups and
all MSNs. Only then will the corresponding items appear in the
menu. Contact your system administrator if you have any ques-
tions about your authorisation and the current configuration of
MSN groups.
After you have selected an MSN, an MSN group or all MSNs,
select the type of call forwarding (
Afterƒdelay
Dest.
tion (
Note:
For this type of call forwarding, the (external) destination
number is always entered without the trunk line seizure code
digit.
Afterƒdelay
,
, you activate or deactivate call for-
: This function is only available in the menu if
: Select the MSN (one of the telephone num-
Busy
or
), and then enter the external destina-
).
Text
to label the key.
On
. Active call forwarding
Busy
,
) is indicated by a "+"
Immediately
,
Main Menu 83
All
Advertisement
Table of Contents
