Table of Contents
Advertisement
Note:
MenuCard "Selection" in the Idle State
Making Calls
The state-dependent MenuCards are illustrated at the end of
each of the following sections.
As a rule, the features are only available to you if they can
actually be executed.
Press (but do not hold down) the MenuCard key
also works if you have already lifted the handset), then select ...
Unpark call
: Consecutively unparks one or more connec-
tions which you have previously parked, for instance to make
enquiries or to forward calls (see MenuCard "Conversation"
starting on page 46).
Pick-up
: Accepts a call for another telephone in your pick-up
group.
Pick-up select...
: Accepts a call for any other telephone.
To do this, enter the telephone number of the other telephone. If
the other telephone is already in the call state (e.g. an answering
machine is in announcement mode), you pick up the call. The
subscriber for whom you picked up the call must belong to a
user group for which "Call removal" authorisation is activated,
otherwise "Pickup selective" is not possible.
Announcement
: After entering the call number, you can initi-
ate an announcement to another system telephone, or on a
group of system telephones.
Intercom
: After entering the device ID, you can initiate an
announcement to a single system terminal. The microphone of
the end terminal called will be switched on and the person you
are calling can immediately answer your announcement. The
"Intercom" function cannot be used for announcements to a
group of terminals.
Charges
: For each trunk key, you can view the charges for the
last call as well as the total charges.
Door opener
: This activates the door opener.
Notes
: Note a call number and a name or dial a noted call
number.
(this
General Functions 41
Advertisement
Table of Contents
