Table of Contents
Advertisement
106 Programming Keys
to save both the state of a function (on/off, e. g. for call pro-
tection) and the values of a function (e. g. a specific display
language). In this way a function in a link has a specific
switching functionality compared to a single function key.
The MenuCard "Stack" or "Link features" is redisplayed
■
after you have programmed the menu entries (
Features
), and list the new entry. As described you can
now add a further entry. If all memory locations are occu-
pied you will hear a negative acknowledgement tone.
Save
: With this menu point the stack or link can be saved.
■
Delete key
: With this menu point the stack or link can be
■
deleted.
A key programmed with a stack can be operated as follows:
Short press: The programmed entries are displayed in a
■
selection menu. Select the desired entry and press the
key. The programmed call number will be dialled or
the programmed function will be executed.
Press and hold: The MenuCard for the key will be opened.
■
You can now edit the entries of the stack. Select the desired
entry. In order to modify the entry (e. g. a programmed call
number) press the
tion press the
A key programmed with a link can be operated as follows:
Short press: The programmed function are executed in
■
succession. You will hear an positive acknowledgement
tone when all functions have been correctly executed.
Press and hold: The MenuCard for the key will be opened.
■
You can now edit the functions of the link. Select the
desired function. In order to modify the function press the
key. In order to delete the function press the
key.
The LED on a key programmed as a stack has no function. An
illuminated LED of a key programmed as a link indicates that all
functions of the link are active (switched on).
key. In order to delete the func-
key.
Features and MenuCards
Dest.
or
Advertisement
Table of Contents
