Using Destination Keys To Make Calls; Using Routes To Make Calls - Telekom T-Comfort 630 User Manual

Using Destination Keys to Make Calls

Using Routes to Make Calls

44 Making External/Internal Calls
and/or
press the particular call key (hands-free mode – only on the
T-Comfort 730 Systemtelefon and the T-Comfort 830 Sys-
temtelefon).
Z
Dial the internal telephone number.
You can save call numbers to call numbers. To dial, simply press
the destination key.
H
/ / Then you pick up the handset or press the
desired call key or the hands-free/open-listening key. Your call
key is seized.
HZ
(routing code, tel. no.)
in enquiry calls:
G Z
(routing code, tel. no.)
The Comfort Pro S/T-Comfort 930 DSL establishes calls to the
desired subscribers either automatically or via specific routes.
Your system administrator configures these routes in the
Comfort Pro S/T-Comfort 930 DSL and specifies how each
route is seized. In order to manually seize a specific route for a
call, you dial the routing code before dialling the (internal or
external) telephone number. By making calls via specific routes,
you can e.g. contact subscribers in the branches of a large com-
pany network. It is also possible to use a manually-entered rout-
ing code to record your call-charge data for private and busi-
ness external calls separately.
The default route "External line" is always present and cannot
be deleted. Automatic trunk line seizure uses the
Comfort Pro S/T-Comfort 930 DSL trunk line seizure code digit
for the default route.
Making Calls