Table of Contents
Advertisement
Note:
Automatic Call Connection
During Another Call
50 Accepting Calls
administrator can also assign the virtual number a name. If this
has been done, the name is shown on the display of your tele-
phone.
H
/
Lift the handset or press the call key to which the call is
being signalled (hands-free mode – only on the T-Comfort 730
Systemtelefon and the T-Comfort 830 Systemtelefon).
You cannot forward an internal telephone number to a vir-
tual telephone number. The Comfort Pro S/
T-Comfort 930 DSL cannot execute such a double forward-
ing.
External calls with unknown call number
When you receive an external call where the caller indicates a
different number than the one actually being transmitted (CLIP
no screening), your display will show a "?" next to the call
number. If the indicated call number is saved as a phonebook
entry, as usual, the name will be shown along with a question
mark.
In certain operational modes (e.g. in hands-free operation or
when making calls with a headset), it can be useful to be able to
accept subsequent calls automatically. On your system tele-
phone, you set the delay after which calls are automatically con-
5ƒAuto call Answer.
nected in the
1ƒCalls
menu.
On the Same Call Key
G
You are speaking on the telephone, hear the short tone (call-
waiting signal) and see the call on your display.
Press the call key assigned to the line on which you are
speaking. This puts your first call on hold and connects you to
the new caller.
h
/
Press the disconnect key to end the current call. On
the T-Comfort 630 Systemtelefon replace the handset.
Press the call key again.
sub-menu of the
Making Calls
Advertisement
Table of Contents
