Table of Contents
Advertisement
Note:
MenuCard "Connections"
Note:
Select
1ƒCall pick-up
followed by ...
Features and MenuCards
6ƒDelete keys
: After you have entered your user PIN, all
functions and numbers that you have assigned to the keys are
deleted.
7ƒAvailability
: All active features that hinder your availa-
bility (call protection, call forwarding, call waiting protection),
are cleared.
8ƒCall wait. prot.Terminal
terminal) During a telephone conversation, no further calls are
signalled by the call waiting tone. The new caller hears the busy
tone. Activate the function with
trunk keys on your telephone.
9ƒCall wait. prot.Key
protection separately for each trunk key on your telephone.
Select the key for which you want to set call protection and acti-
On
vate the function with
Call-waiting protection is only activated on the telephone on
which it was set. If your internal call number is also stored on
the trunk or team keys of other telephones, call-waiting pro-
tection is not automatically activated on these telephones.
The availability of the following features will depend on the
current call state of your telephone. These features are also
in the call-dependent MenuCards. Some entries in the
Connections
MenuCard are only shown when you pro-
gramme the function onto a function key (please refer also
to the chapter Programming Functions (Features) starting
on page 103).
1ƒPick-up
: This accepts a call for another telephone in
■
your pick-up group.
If the called subscriber is a member of a user group for
which pickup protection is active, then you cannot pick up
calls to this subscriber's number.
2ƒPickup select...
■
telephone. To do this, enter the telephone number of the
other telephone. If the other terminal is already in the call
state (e.g. an answering machine is in announcement
: (call waiting protection
On
. This setting applies to all
: You can activate call-waiting
.
: You can answer a call for any other
Main Menu 91
Advertisement
Table of Contents
