Table of Contents
Advertisement
MenuCard "Prog. team key"
MenuCard "Prog. busy key"
Programming Keys
Note:
Programming Call Numbers (Destinations)
Features and MenuCards
This MenuCard can be used for the quick configuration of the
features of a call key which has been programmed as a team
key. For further information, please refer to MenuCard "Prog.
team key" starting on page 71.
This MenuCard can be used for the quick configuration of the
features of a call key which has been programmed as a busy
key. For further information, please refer to the section entitled
MenuCard "Prog. busy key" on page 72.
Your system telephone provides you with several keys which
you can individually configure with destinations or functions.
You will find an overview of which keys on your telephone these
are in section Programmable Keys with LED Display starting
on page 18.
You need the appropriate authorisation to operate these
keys on your system telephone. Consult your system admin-
istrator if your authorisation has to be changed.
The assignment of the programmable keys with destinations or
functions can also be done in the Configurator of the Web con-
sole (in the PBX Configuratio: Devices: System Phones
menu). It makes no difference whether the keys are pro-
grammed on the system telephone or in the Configurator. Set-
tings are immediately valid in both cases and overwrite – when
present – previous settings.
You can store telephone numbers on programmable keys,
allowing you to dial a number simply by pressing the particular
key.
Programming Keys 101
Advertisement
Table of Contents
