Table of Contents
Advertisement
System Telephones on the Comfort Pro S/T-Comfort 930 DSL
This connection is currently not supported by the
Comfort Pro S/T-Comfort 930 DSL, as the system uses a
separate doorbell input.
one 6-pole socket (4):
■
for connecting a door display (a "door busy" indicator)
Note:
The "door busy" indicator and the recording equipment are
switched by the same relay. Although they can be connected
in parallel, they cannot be switched separately.
Audio adapter on the back of a T-Comfort 730 Systemtelefon
The safe operation of equipment in combination with audio
equipment can only be guaranteed when you use certified, orig-
inal accessories. In order to avoid invalidating liability and war-
ranty, connect only audio equipment certified for this purpose
via the audio adapter. You will find a list of such equipment in
the "Mounting and Commissioning" user guide. For further
information, please contact your T-Com customer consultant (in
a T-Punkt).
In order to install an adapter, you have to remove the cover from
the back of the T-Comfort Systemtelefon. Insert the audio
adapter in the socket until it snaps into place. It is possible to
install adapters during operation: you do not have to disconnect
the telephone from the communications system.
Connect the external equipment appropriately according to
type.
Note:
In the case of a T-Comfort 830 Systemtelefon, you can plug
the audio adapter into either of the two sockets. However,
only one audio adapter can be operated on each
T-Comfort 830 Systemtelefon.
1
2
3
4
Add-ons 13
Advertisement
Table of Contents
