Table of Contents
Advertisement
Remote-controlled Functions
Remote-controlled Dialling (Call Through)
Remote-controlled Functions
The Comfort Pro S/T-Comfort 930 DSL enables remote-control-
led calls and remote-programmable call forwarding. These fea-
tures are set up by the administrator when configuring the sys-
tem. To carry out these features the system PIN is required.
The system PIN is issued by the system administrator, and it
must be changed from the factory setting ("0000") to another
value in order for the features described below to function.
In addition, all the owners of voiceboxes can, with the corre-
sponding authorisation, call their voiceboxes from external tele-
phones. They can remotely access and edit their messages as
well as modify the central settings of their voiceboxes.
Without internal number assignment
Z
(reserved tel. no.)
(trunk line seizure code, e.g.
Z
(external tel. no.)
With internal number assignment
Z
(reserved tel. no.)
(trunk line seizure code, e.g.
Z
(external tel. no.)
You can call the Comfort Pro S/T-Comfort 930 DSL from an
external telephone, from your home for example, and then dial
an external telephone number. The cost of the call is then billed
to the Comfort Pro S/T-Comfort 930 DSL line. This way you can
take advantage of different tariff zones, for example.
For this feature, the system administrator must have set up a tel-
ephone number (for remote control) in the Comfort Pro S/
T-Comfort 930 DSL. In addition, the number reserved in the
Comfort Pro S/T-Comfort 930 DSL can also be assigned an
internal telephone number via which the dialling is to be per-
formed. In the case of remote-controlled dialling, there is no
check on authorisation.
Remote-controlled Dialling (Call Through) 73
Z
(system PIN)
)
Z
(system PIN)
)
Z
(internal tel. no.)
Advertisement
Table of Contents
