Table of Contents
Advertisement
Add-ons
System Telephones on the Comfort Pro S/T-Comfort 930 DSL
Inserting Label Strips
Label strips are supplied for the corresponding labelling. Pro-
ceed as follows to label the insert:
Press down slightly on the bottom part of the cover, sliding it
■
downwards so that the top part of the cover snaps out and
you can remove this and take out the label strip. On the
T-Comfort 630 Systemtelefon slide the cover to the right to
remove it.
Replace the printed strips.
■
To replace the cover, insert it in the slot, then slide it down
■
and finally slide it up until the catches snap into place. On
the T-Comfort 630 Systemtelefon you place the cover in the
slot and slide it to the left until it snaps into place.
Printing Label Strips
Using the Configurator of the Web console, you can print the
labels for a selected system telephone with the current key
assignment (PBX Configuration: Devices: System phones
menu).
Labelling Function Keys
If you have programmed a function key then you can enter a
label for this key which will be shown in the display. You will find
further information in the section Programming a Function
onto a Key starting on page 104.
On the back of the T-Comfort 730 Systemtelefon and the T-
Comfort 830 Systemtelefonyou will find sockets to which add-
ons and accessories can be connected, either directly or via var-
ious adapters:
one socket on the T-Comfort 730 Systemtelefon, and
■
two sockets on the T-Comfort 830 Systemtelefon.
■
The following components are supported by the Comfort Pro S/
T-Comfort 930 DSL:
U
adapter
■
pn
Power supply
■
Add-ons 9
Advertisement
Table of Contents
