Table of Contents
Advertisement
Note:
MenuCard "Busy"
48 Making External/Internal Calls
machine is in announcement mode), you pick up the call. The
subscriber for whom you picked up the call must belong to a
user group for which "Call removal" authorisation is activated,
otherwise "Pickup selective" is not possible.
(*: Not possible if there are already two active calls.)
If a called subscriber is a member of a user group for which
pickup protection is active, then you cannot selectively pick
up calls to that subscriber's number.
Hold
: Holding is a team function. When you place a call on
hold, this call may be picked up by another member of your
team (see also the section Holding and Transferring Calls with
a Function Key starting on page 68).
Door opener
: Activates the door opener.
Notes
: You can note a telephone number during a call. Under
Dest.
, enter the number and a
the number. You can call the number with
Intercept
: The telephone numbers of "malicious callers"
can be saved in your network operator's exchange (if this serv-
ice is enabled). The function is also possible if the caller has
already hung up!
Press (but do not hold down) the MenuCard key
select ...
Callback
: You leave your callback request with a busy inter-
nal subscriber (not possible for hunt group numbers).
Pick-up select...
*: You accept a call for any other tele-
phone. To do this, enter the number of that telephone. If the
other terminal is already in the call state (e.g. an answering
machine is in announcement mode), you pick up the call. The
subscriber for whom you picked up the call must belong to a
user group for which "Call removal" authorisation is activated,
otherwise "Pickup selective" is not possible.
(*: Not possible if there are already two active calls.)
Text
, if required, and
Dial
.
Making Calls
Save
, then
Advertisement
Table of Contents
