Table of Contents
Advertisement
Key Lines
Note:
System Telephones on the Comfort Pro S/T-Comfort 930 DSL
When the telephone is idle, you can see the subscriber's name
or the telephone number – as assigned to the telephone in the
Configurator of the Web console – as well as the time (the T-
Comfort 830 Systemtelefon also displays the day of the week
and the date). If more than one key is assigned a telephone
number, the assignment of the call key 1 is always the one dis-
played.For the system telephones T-Comfort 630/T-
Comfort 730, the system administrator can adjust the setting so
that the date is shown instead of the user name.
The T-Comfort 830 Systemtelefon display
During a call, the current charge counter and annotation texts
are displayed (if configured). During an enquiry call you will see
the number of the enquiry call you dialled.
The display next to the keys is assigned to them on a line-by-line
basis. Depending on the type of key, the following display texts
are shown. On the T-Comfort 630 Systemtelefon the display
always shows the active line.
The call and seizure states are identified by additional sym-
bols on the call keys. For details, refer to the section entitled
Making Calls starting on page 32.
1 Call key in idle state: internal telephone number or a user-
assigned text.
2 Call key during dial and connection state: dialled telephone
number.
3 Destination key with names programmed: programmed name.
Display and MenuCards 21
Advertisement
Table of Contents
