Table of Contents
Advertisement
simultaneously. When using a headsets it is useful to activate
the "En-bloc dialling" feature (see the section entitled Menu-
Card "Phone Settings" starting on page 87). For further infor-
mation on connecting a DECT headset, please contact the T-
Com Sales Department.
Loudspeaker and headphones:
To activate an external loudspeaker or headphones, use the
hands-free key
. The external loudspeaker will be used
instead of the telephone's built-in loudspeaker.
Microphone:
An external microphone is activated automatically when you
use the hands-free key
to switch on the loudspeaker.
The external microphone is used instead of the telephone's
built-in microphone.
Door display:
The door display lamp (the "door busy" indicator) lights up as
soon as the handset is lifted, the loudspeaker switched on or a
headset activated. To activate/deactivate this function, use
4 Door display
either a function key or the menu item
.
Recording:
You can start recording as soon as the handset has been lifted
or the loudspeaker switched on. To start recording, either use a
function key or the menu item
5 Record
. Recording stops when the handset is replaced or
the loudspeaker switched off.
Note:
If your recording equipment does not support the audio
adapter's start/stop signal, you will have to start and stop
the recording directly on the recording equipment itself.
Activation via the telephone is then no longer necessary.
System Telephones on the Comfort Pro S/T-Comfort 930 DSL
External Audio Devices 31
Advertisement
Table of Contents
