Table of Contents
Advertisement
Note:
MenuCard "Prog. team key"
Team Functions
8ƒCall wait. prot.
calls for the telephone number of this trunk key are not signalled
by a call waiting tone. The caller hears the busy tone.
If the internal telephone number of this trunk key is config-
ured on several telephones, call-waiting protection is also
activated on these telephones.
Press and hold down the team key
select ...
1ƒModify text
: The text currently assigned to the key is
shown on the display of your telephone. To change the text,
press
. Delete the existing text with the
enter new text, if required. Press
Save
. If you delete the text, only the key's telephone number
will be displayed.
2ƒCall signalling
Opticalƒ&ƒacoustic
this key is to be
Acousticƒafter delay
delay
, specify the number of seconds after which your tele-
phone is to ring.
3ƒCall protect
: Switch call protection
calls, for internal calls only, or for external calls only. If call pro-
tection has been activated, this team key will only indicate calls
by means of a visual signal, even if they are made from a direct-
call key.
4ƒRing tone
: You can set the
ferent types of incoming calls (
2ƒInternal calls
each trunk key. Proceed as described in the section "2 Ring
Tone" on page 87.
5ƒCall wait. prot.
calls for the telephone number of this team key are not signalled
by a call waiting tone (but at the team keys of other terminals
unless a call waiting protection was programmed there).
: While you are making a call, other
for a moment, then
and confirm this with
: Determine whether call signalling to
Opticalƒonly
,
Acoustic after
. If you select
On
Volume
and
1ƒExternal calls
3ƒVIP call
4ƒDoor call
,
,
: While you are making a call, other
Programming the Call Keys 71
key and
or
Off
or
for all
Melody
for dif-
,
)for
Advertisement
Table of Contents
