Using Automatic Called Number Redial (Acnr) - iPECS LIP-9002 User Manual

NOTE
To allow others to contact you via the Intercom directory, you must enter a
name for your station (up to 20 characters). Refer to the "To enter your
station user name" directions below.
To place a call using Dial by Name:
 Press the SPEED button twice,
 Dial the desired directory,
– 1: Private directory,
– 2: Public directory,
– 3: View Station Name(Intercom Directory),
 The LCD will display the names in alphabetical order,
 Scroll using the VOL  buttons or enter search characters. For
details on character entry, see 1.6 Entering Text
 Press the HOLD (SAVE) button to place the call.
To enter your station user name:
 Press the TRANSFER (PGM) button,
 Dial 74 (Station User Name code),
 Enter the Name, up to 20 characters. Use the DND button to delete a
character). For details on character entry, see 1.6 Entering Text
4.3.6

Using Automatic Called Number Redial (ACNR)

When making an external call and a busy signal is received, Automatic
Called Number Redial (ACNR) will retry the number until the call is
connected, the feature is cancelled, or the maximum attempts are made.
For each attempt, the system will activate your speaker then place the call
with the microphone muted. When the called party answers, you must
select the MUTE button, or lift the handset. Either of these actions will
cancel the ACNR request as well as connect you to the remote party.
To set up ACNR, while on an outgoing call:
 Press the assigned REDIAL flexible button,
 Hang-up the handset.
28
.
.
LIP-9002 User Guide - ST