Replacing The Dc Switch Assembly; Figure 8-20 Removing And Replacing The Front Panel Dc Switch Assembly - Sun Microsystems Ultra 60 Service Manual

Detent tab (2)
Removing and Replacing the Front Panel DC Switch Assembly
FIGURE 8-20
8.8.2

Replacing the DC Switch Assembly

This procedure revises the DC switch assembly replacement procedure found in the
Sun Ultra 60 Service Manual, part number 805-1709.
Caution – Use proper ESD grounding techniques when handling components. Wear
an antistatic wrist strap and use an ESD-protected mat. Store ESD-sensitive
components in antistatic bags before placing them on any surface.
Caution – The DC switch assembly replacement procedure is a complex procedure.
It is recommended that a qualified field service representative perform this
procedure.
Caution – When replacing the DC switch assembly, ensure that the DC switch
spade connectors are pointed towards the bottom of the case.
Chapter 8 Major Subassemblies 8-31