Screw (2)
SCSI drive bay
Removing and Replacing the SCSI Drive Bay
FIGURE 8-4
8.3.2
Replacing the SCSI Drive Bay
Caution – Use proper ESD grounding techniques when handling components. Wear
an antistatic wrist strap and use an ESD-protected mat. Store ESD-sensitive
components in antistatic bags before placing them on any surface.
1. Replace the SCSI drive bay as follows (
):
FIGURE 8-4
a. Position the SCSI drive bay on the channel slides and slide it in.
Chapter 8 Major Subassemblies
8-9