Technical Information
Figure 4-10: Water Intake System with Integrated Flow Meter
Figure 4-11: Water Hardness Selector
With correct programming and operation, the water softener should supply water with
a hardness level < 4° in all wash programs. With certain types of glass it may be
necessary to set the wash water hardness individually to avoid possible glass
corrosion. Depending on the water hardness, the selector at the water intake must
be set to between 0 - 3 (non-Plus models only). This sets the quantity of supply
water flowing directly into the cabinet without passing the water softener. For details,
see the model-specific operating manual.
34
G 600/G 800
1 Ion exchanger (softener) input
2 Intake opening in sump
3 Ion exchanger (softener) output
4 Water softener selector
5 Water bypass
6 Non-return device
7 Water reservoir
8 Water intake channel
9 Cabinet ventilation
10 WaterProof system valve Y2
11 Salt container
12 Solenoid valve Y38/1
13 Non-return valve
14 Ion exchanger