G 896; Table 6-56: G 694, G 894 Service Mode 2 Functions; Table 6-57: G 896 Programming Flow Chart - Miele G 600 Series Technical Information

Technical Information
2. Press and hold the Delay Start and Start/Stop button while turning the dishwasher on.
Flashing Intake/Drain and Salt lights and a lit Rinse light indicate successful accessing
of Service Mode 2.
3. Press the Top solo button twice. Flashing Intake/Drain and Salt lights and a lit End light
indicate successful accessing of Stage 3 of Service Mode 2.
4. Use the arrow buttons to scroll to the appropriate program function.
5. Use the Top solo button to change the status of the function.
6. To save, press the Start/Stop button twice.
Program
Pots & Pans
Sani Wash
Normal Plus
Normal
China & Crystal
Economy

Table 6-56: G 694, G 894 Service Mode 2 Functions

1
Can only be set if "+14 min" is selected in programming mode. See Section 6.8.10.1.2.
6.8.11

G 896

Enter Programming Mode
Enter Service Mode 1
Enter Service Mode 2

Table 6-57: G 896 Programming Flow Chart

Function
Increase temperature
Water softener
Interim rinses
Increase water level
Extended drying
EGS
Programming Flow Chart
To access:
Water hardness settings
Extended drying fan time (+14 minutes)
To access:
Manual step mode
Component test program
To access:
Error messages
Program index
Increased water temperature selection
Water softener (with/without)
Interim rinses
Extended water intake
Extended drying fan time (+ 45 minutes)
EGS
118
Status of program
Options
light
66 Flashing
72 Lit
On Flashing
Off Lit
1 rinse Flashing
2 rinses Lit
Norm Flashing
Increase Lit
Off Flashing
1
On Lit
With Off
Without On
G 600/G 800