Stage 2; Stage 3; Table 6-49: G 892, G 832 Fault Code Chart; Table 6-50: G 892, G 832 Program Indices - Miele G 600 Series Technical Information

Technical Information
Fault code
F08
F09

Table 6-49: G 892, G 832 Fault Code Chart

6.8.9.3.2

Stage 2

1. To access Stage 2 of Service Mode 2, close the door and turn the dishwasher on. The
Start/Stop light must be blinking. If the Start/Stop light is not blinking, press and hold
the Start/Stop button for at least 3 seconds to exit the cycle. The Start/Stop light should
now be blinking.
2. Press and hold the Start/Stop button while turning the dishwasher on. Release the
Start/Stop button and immediately press it 2 more times. Flashing Intake/Drain and Salt
lights indicate successful accessing of Service Mode 2.
3. Press the Top solo button once. Flashing Intake/Drain and Salt lights and a lit Drying
light indicate successful accessing of Stage 2 of Service Mode 2.
4. Use the Program Index chart (Table 6-50) to determine the electronic version.
5. To save, press the Top solo button twice.
Index
P0
P1
P2
P3

Table 6-50: G 892, G 832 Program Indices

6.8.9.3.3

Stage 3

1. To access Stage 3 of Service Mode 2, close the door and turn the dishwasher on. The
Start/Stop light must be blinking. If the Start/Stop light is not blinking, press and hold
the Start/Stop button for at least 3 seconds to exit the cycle. The Start/Stop light should
now be blinking.
2. Press and hold the Start/Stop button while turning the dishwasher on. Release the
Start/Stop button and immediately press it 2 more times. Flashing Intake/Drain and Salt
lights indicate successful accessing of Service Mode 2.
3. Press the Top solo button twice. Flashing Intake/Drain and Salt lights and a lit End light
indicate successful accessing of Stage 3 of Service Mode 2.
4. Use the arrow buttons to scroll to the appropriate program function.
5. Use the Top solo button to change the status of the function.
6. To save, press the Start/Stop button twice.
Program
Pots & Pans
Sani Wash
Normal Plus
Normal
Economy
Program light and
status
Normal Plus Lit
Normal Lit
Program button
Pots & Pans
Sani Wash
Normal Plus
Normal
Function
Increase temperature
Water softener
Interim rinses
Increase water level
Dishwasher width
114
Rinse light Fault
status
Flashing Water intake failure, heater level
switch
Flashing Heater level switch not switching
on at the end of thermal stops
Status
Lit
Lit
Lit
Lit
Options Program light status
66 Flashing
72 Lit
On Flashing
Off Lit
1 rinse Flashing
2 rinses Lit
Norm Flashing
Increase Lit
24" Flashing
18" Lit
G 600/G 800