Middle Spray Arm Removal; Bottom Spray Arm Removal; Top Spray Arm Feed Pipe Removal; Middle Spray Arm Cover Removal - Miele G 600 Series Technical Information

G 600/G 800
2. Press the top spray arm upwards to engage it.
3. Unscrew clockwise.
5.16

Middle Spray Arm Removal

1. Open the door.
2. Remove the upper basket.
3. Press the middle spray arm upwards to engage it.
4. Unscrew clockwise.
5.17

Bottom Spray Arm Removal

1. Open the door.
2. Remove the lower basket.
3. Lift up on the spray arm to remove it.
5.18

Top Spray Arm Feed Pipe Removal

1. Remove the left side panel. See Section 5.3.
2. Remove the top spray arm. See Section 5.15.
3. Unscrew the locknut on the spray arm mount.
4. Loosen the bottom hose clip on the feed pipe; pull off the hose.
5. Remove the feed pipe from its mounting bracket by lifting upward.
5.19

Middle Spray Arm Cover Removal

1. Insert a large screwdriver between the cover retainer and the metal holder on the
rear of the cabinet wall. See Figure 5-18.
2. Unclip the spray arm cover and slide it upwards.
3. Remove the cover by pulling it downward and outward.

Figure 5-18: Middle Spray Arm Cover Removal

Technical Information
57