G 600/G 800
5.4
Spring Bracket Replacement
1. Remove the side panels; refer to Section 5.3.
2. Fold up the mineral wool matting (depending on model).
3. Hold the spring with one hand and pull it down.
4. Release the cable from the bracket (Figure 5-4, Item 3).
5. Unhook the spring (Figure 5-4, Item 1).
6. Remove the raised-head screws (Figure 5-4, Item 2).
7. Remove the bracket.
Figure 5-4: Side View, Door with Basket
5.5
Cover Plate Removal
1. Remove the two screws and the plinth (toekick).
2. Remove the raised-head screws (Figure 5-5, Item 1).
3. Tilt the cover plate forwards slightly and lift its bottom edge out of the drip pan.
4. Remove the cover plate.
Caution!
With the springs removed from the
door, the door has no tension.
49
Technical Information