Faults With Water Intake Or Drainage - Miele PG 8133 SCVi Operating Instructions Manual

Frequently asked questions

Faults with water intake or drainage

Problem
One of the following
fault messages is dis-
played:

Open water supply

Intake
The following fault mes-
sage appears in the dis-
play:

Drain
74
Possible cause and solution
The faucet is closed.
 Open the faucet completely.
Before remedying the fault:
 Turn the dishwasher off with the  button.
There is a problem with the water intake.
 Open the faucet completely and start the program
again.
 Clean the water intake filter (see "Frequently asked
questions").
 The flow pressure at the water connection is lower
than 30 kPa (0.3 bar).
Consult a plumber.
Before remedying the fault:
 Turn the dishwasher off with the  button.
Water drainage fault.
There might be water in the wash chamber.
 Clean the filter combination (see "Cleaning and
care – Cleaning the filters").
 Clean the drain pump (see "Frequently asked
questions").
 Clean the non-return valve (see "Frequently asked
questions").
 Remove any kink or loop in the drain hose.