Extended Drying Fan Time; Service Mode 1; Table 6-46: G 892, G 832 Water Hardness Settings; Table 6-47: G 892, G 832 Drying Time Settings - Miele G 600 Series Technical Information

(all us models)
Hide thumbs Also See for G 600 Series:
Table of Contents

Advertisement

Technical Information
4. The program light will either flash or stay lit, depending on the selection made (see Table
6-46 below). Note that the Pots & Pans and Sani Wash programs are used twice.
5. Press the Top solo button once to store the water hardness setting.
6. To save: Press the Start/Stop button twice.
Note: A solid program light will indicate the current water hardness setting.
Grains per Gallon
1 – 4
5 – 7
8 – 11
12 – 16
1
17 – 21
22 – 24
25 – 31
32 - 70

Table 6-46: G 892, G 832 Water Hardness Settings

1
Factory setting
6.8.9.1.2

Extended Drying Fan Time

1. Access Programming Mode.
2. Press the Top solo button once.
3. Use Table 6-48 below to determine the drying fan time.
4. Press the Top solo button to toggle from 4.5 minutes to 14 minutes.
5. To save, press the Start/Stop button twice.
Program light
Pots & Pans

Table 6-47: G 892, G 832 Drying Time Settings

6.8.9.2

Service Mode 1

1. To access Service Mode 1, close the door and turn the dishwasher on. The
Start/Stop light must be blinking. If the Start/Stop light is not blinking, press and
hold the Start/Stop button for at least 3 seconds to exit the cycle. The Start/Stop
light should now be blinking.
Press and hold the Start/Stop button while turning the dishwasher on. Hold the
2.
Start/Stop button for at least 3 seconds. Successful accessing of Service Mode
1 is indicated by a lit Intake/Drain light.
3. Using the arrow buttons, select a program and press the Start/Stop button.
4. Pressing the Start/Stop button repeatedly will allow the technician to advance
through the program. If the Start/Stop button is not pressed, the program steps
are carried out automatically, in their normal order.
Note: The program chart in the wiring diagram should be used to follow the
machine functions when stepping through a program.
5. If the dishwasher door is opened and closed or the dishwasher is turned off and
on, the service mode will be canceled and the machine will continue to advance
normally.
Program Button Light
Pots & Pans
Sani Wash
Normal Plus
Normal
Economy
Rinse & Hold
Pots & Pans
Sani Wash
Options
4.5 minutes
14 minutes
112
G 600/G 800
Light Solid
Light Flashing
X
-
X
-
X
-
X
-
X
-
X
-
-
X
-
X
Status of program light
Flashing
Lit

Advertisement

Table of Contents
loading

Table of Contents