Table of Contents
Advertisement
SETTING UP FOR Macintosh
To use this printer with your computer, the printer driver should be installed onto your
computer's hard drive. In this chapter, you will learn how to install them and how to use the
Online Manual.
The following term is used in this chapter.
CD-ROM
Means the supplied CD-ROM with the AJ-2100 Series Software.
Be sure to read the Readme file before installing the printer driver.
(The location of the Readme file; CD-ROM - Readme folder - English folder - Readme)
HARDWARE AND SOFTWARE REQUIREMENTS
Check the following hardware and software requirements in order to install the AJ-2100
series Printer Driver.
Computer type
Operating system
Display
Hard disk free space
Other requirement for hardware
INSTALLING THE PRINTER DRIVER
The AJ-2100 series printer driver is provided on a CD-ROM.
Make sure that the printer is connected to your computer by
1
USB cable.
Turn on the printer, and then turn on your computer.
2
Insert the supplied CD-ROM into your CD-ROM drive.
3
Double-click the CD-ROM icon on the desktop.
4
Double-click the "Installer" icon.
5
Check if the appropriate language has been selected, and then
6
click the "Next" button.
Normally, the correct language is selected automatically.
After confirming the message on the screen, click the "Install"
7
button and then click the "Continue..." button.
36
Models equipped with USB interface as standard
Mac OS 8.5 or later
640 x 480dots (VGA) or better
10MB or more
An environment on which any of the operating
systems listed above can fully operate
Advertisement
Table of Contents
