Selecting A Language; Selecting A Playback Audio Setting - Toshiba SD-H400-S-TU Installation Manual

__ c_h_a_ p _t_e_f_2
_
~~ Selecting a Language
You can select a preferred language and sound recording system from those included on the disc.
~
Selecting a playback audio setting
D2[1!;VnIV£D'H(:i~m
Press AUDIO during playback.
1
AUDIO
(0)))
The current audio setting is displayed.
e.g.
Notes
o
When you turn on the SD-H400 or replace a disc, SD-H400 returns to the initial
default setting
W.
If you select a sound track which is not included on the disc,
the SD-H400 plays a prior sound track programmed on the disc.
o
Some discs allow you to change audio selections only via the disc menu. If this
is the case, press the MENU button and choose the appropriate language from
the selections on the disc menu.
• Output sound conversion table
B1TSTREAM/PCM jack
PCM
0
Bitstream Noise
: 3D sound enhancement can function.
PCM
Digital Output
Bitstream
DTS
DTS
MP3
MPEGI
LineurPCM
Dolby Digital
MPEGl, MPEG2
Linear PCM 44.1 kHzlI6 bit
DVD
video disc
Audio CD
VIDEO CD
Each time you press the AUDIO button or the
£. 1
T
buttons, the audio settings included on the disc change.
Press AUDIO or
£.1
T while the audio setting is displayed on the
TV screen.
The abbreviation of the language appears instead of the language name.
Refer to the list of languages and their abbreviations.
~
2
To turn off the audio setting display, press the CLEAR button.
You can switch left and right channels by pressing the
AUDIO
button repeatedly during playback.
20
• Selecting sound channels of VIDEO CDs
AUDIO
(0)))
• Signals of 96kHz from the BITSTREAMIPCM jack are Down Sampled to
48 kHz by down sampling process when:
- "3D" is selected.
~
- "PCM Down Sampling" is set to "On,"
~
- a copyright protected disc is played.
• Quantization bit of signals of 20 bit or higher which is output from the
BITSTREAM/PCM jack is 16 bit if they are in a copyright protected disc.