Assembly Steps - LifeSpan Chief Owner's Manual

ASSEMBLY STEPS

1. Connect the computer wires on the left
and right handlebar assembly (2&3) and
with bolts M8*52 (61) to tighten the left and
right handlebar assembly and computer.
2. To lock the left and right outside plastic
cover with screw ST4.2*12 (62).
3. Connect the front handlebar tube (19)
with the bolts M8*26 (66), the bolts M8*52
(61) and flat washer (63).
4. Insert left upright (4) & right upright (5)
into main frame. Connect them with the bolts
M10*25 (64), arc washer (67) and flat
washer (63).
CAUTION:
A. Please don't damage the wires in the
process.
B. Please don't tighten ALL BOLTS before
STEP (3)
5. Connect the computer right cable
between computer frame and right upright.
6. Insert computer frame into left upright
and right upright. Connect them with the
bolts M10*25 (64) and flat washer (63).
CAUTION: Tighten all the bolts again.
- 6 -
CHIEF