Related Manuals for LifeSpan Chief
Summary of Contents for LifeSpan Chief
- Page 1 OWNER'S MANUAL CHIEF Product may vary slightly from the item pictured due to model upgrades - 1 - CHIEF...
-
Page 2: Important Safety Instructions
Sparks from the motor may ignite a highly gaseous environment. Never drop or insert any object into any openings. The treadmill is intended for in-home use only and not suitable for long time running. - 2 - CHIEF... -
Page 3: Important Electrical Information
Be sure to read the entire manual before operating your machine. Understand that changes in speed and incline do not occur immediately. Set your desired speed on the computer console and release the adjustment key. The computer will obey the command gradually. - 3 - CHIEF... - Page 4 Insert the safety key will reset the display. Do not use excessive pressure on console control keys. They are precision set to function properly with little finger pressure. - 4 - CHIEF...
-
Page 5: Assembly Instructions
98. FLAT WASHER 8 HANDLEBAR TUBE W/SCREW DRIVER B. 5# ALLEN C. 6# ALLEN WRENCH 5mm WRENCH 6mm FIXING TOOLS: ALLEN WRENCH :6mm 1 pcs ALLEN WRENCH: 5mm 1 pcs WRENCH W/SCREW DRIVER: 13*15 1 pcs - 5 - CHIEF... -
Page 6: Assembly Steps
5. Connect the computer right cable between computer frame and right upright. 6. Insert computer frame into left upright and right upright. Connect them with the bolts M10*25 (64) and flat washer (63). CAUTION: Tighten all the bolts again. - 6 - CHIEF... - Page 7 4. Children should not be allowed to play on the treadmill or move the treadmill deck up and down. TECHNICAL PARAMETER BUILT UP SIZE(mm) POWER 1890x910x1325 220V~240V(50~60HZ) FOLDABLE SIZE(mm) SPEED RANGE 990*910*1655 1—20Km/h RUNNING BELT 2900x520 NET WEIGHT 114.5KGS SIZE(mm) 6 LED DISPLAY SPEED, DISTANCE, CALORIES, PULSE, TIME and INCLINE - 7 - CHIEF...
-
Page 8: Exercise Guide
Start each workout with 5 to 10 minutes of stretching and some light exercises. A proper warm-up increases your body temperature, heart rate and circulation in preparation for exercise. Ease into your exercise. Training zone Exercise - 8 - CHIEF... -
Page 9: Workout Guidelines
The most important factor here is the amount of effort you put in. The harder and longer you work, the more calories you will burn. Effectively this is the same as if you were training to improve your fitness, the difference is the goal. - 9 - CHIEF... -
Page 10: Operation Guide
3digit display Incline. 1.0.3 4digit display Time、Program number、Weight. 1.0.4 3digit display Speed. 1.0.5 3digit display Distance. 1.1 16*16 Lattice 1.1.1 Display SPEED & INCL program figure 1.1.2 display 400M raceway 1.1.3display prompt information 2. Button function: - 10 - CHIEF... - Page 11 2.0.6.1 When the treadmill is running, it can adjust the speed fast and speed slow. 2.0.7 INCLINE shortcut key*10 2.0.7.1 When the treadmill is running, it can set up the incline quickly. 2.0.7.2 Under the USER program edit status, it can edit the incline quickly. - 11 - CHIEF...
- Page 12 4.1.1 Press “SELECT” button second time, “Lattice” window will display Message8， “TIME” window will display running time, the other windows will crush out, press“SPEED FAST/SLOW” 、 “INCLINE UP/DWN”or handlebar button to revise, then press“ENTER”button to confirm and - 12 - CHIEF...
- Page 13 4.1.8 You can press“INCLINE UP/DWN、SPEED FAST/SLOW、incline/speed shortcut key, handlebar button*4” to adjust the incline and speed. PROGRAM1----PROGRAM10（P1—P10） 4.2.1 P1—P10 function operation flow are the same and the inner install program is divided into - 13 - CHIEF...
- Page 14 SPEED program figure. 4.3.3 Press“ENTER”button， “Lattice”window start to lighten from the first sect, the other windows are crushed out except the incline and speed windows. It means enters into the edit status. “INCLINE UP/DWN、SPEED FAST/SLOW、INCLINE/SPEED shortcut key, - 14 - CHIEF...
- Page 15 1 space from left until moving all sects. The other function is the same as P1—P10. 5. Display usage and enactment range: 5.1 Display usage 5.1.1 400M standard raceway chart: Beginning raceway Running raceway 5.1.2 P1—P10 display 5.1.3 U1—U3 display chart: - 15 - CHIEF...
- Page 16 PAUSE PRESS START TO RESUME OR RESET Messaage5 SAFETY KEY PROTECTION Messaage6 SPEED Messaage7 INCLINE Messaage8 ADJUST TIME THEN PRESS START Messaage9 ADJUST DISTANCE THEN PRESS START Messaage10 ADJUST CALORIES THEN PRESS START Messaage11 ADJUST AGE THEN PRESS ENTER - 16 - CHIEF...
- Page 17 2 At every state, once the safety key or Power button is pulled out, the motor will completely stop. And once the safety key is pulled out, both the window will display and the system will shout with “B” sound to count down 10 seconds. - 17 - CHIEF...
-
Page 18: Troubleshooting Guide
（220~240V） testing. check the distance and 1.Adjust the distance within SENSOR do not touch well. space between SENSOR No speed 5m/m. and magnet. check the wire if circuit 2.Change the wire or SENSOR breaker tripped. - 18 - CHIEF... - Page 19 4．Incline motor wire does 4．Insert the incline motor wire. not connect well 1．Do not exceed the treadmill Over loading protector 1．The limited weight user’s weight. 2．Change the limit resistance 2．Drivers badness or change the drivers - 19 - CHIEF...
-
Page 20: Maintenance And Servicing
LUBRICATE THIS FRICTION POINT TO PROLONG THE USEFUL LIFE OF YOUR TREADMILL. FAILING TO DO THIS MAY VOID YOUR WARRANTY. WARNING: UNPLUG POWER CORD BEFORE MAINTENANCE. WARNING: STOP TREADMILL BEFORE FOLDING. 1 Maintenance and servicing AFTER EACH USE (DAILY) Clean and inspect, following these steps: - 20 - CHIEF... - Page 21 • Inspect the power cord. If the power cord is damaged, contact Lifespan Fitness. • Make sure the power cord is not underneath the treadmill or in any other area where it can become pinched or cut.
-
Page 22: General Cleaning
IF YOU FAIL TO COMPLY WITH LIFESPAN’S MAINTENANCE AND SERVICING STEPS ABOVE, YOU MAY VOID YOUR WARRANTY. IF YOU REQUIRE A SKILLED LIFESPAN REPRESENTATIVE TO UNDERTAKE ONE OF THE STEPS ABOVE, PLEASE EMAIL US AT lifespanfitness@hotmail.com. 2 General Cleaning ... -
Page 23: Belt/Deck/Roller Lubrication
5 How to check the running mat for proper lubrication: Disconnect the main power supply. Fold the treadmill up into the storage position. Feel the back surface of the running mat. If the surface is slick when touched, then no further lubrication is needed. - 23 - CHIEF... -
Page 24: Belt Tracking Adjustment
If the surface is dry to the touch, apply a suitable silicone lubricant. We recommend you use a silicone based spray to lubricate your Lifespan Treadmill. This Can be purchased from your local sports Retailer or a local hardware store. - Page 25 Over adjusting the belt can cause damage to the mat. If the belts has drifted to the RIGHT If the belts has drifted to the LEFT - 25 - CHIEF...
-
Page 26: Warranty Registration
Please visit the following link to complete the product warranty form online. Please visit: http://www. warrantyform.lifespanfitness.com.au PLEASE NOTE: YOUR WARRANTY IS ONLY VALID IF YOU CAN PROVE YOU ARE THE ORIGINAL PURCHASER ON THIS ITEM (i.e. A copy of the receipt, invoice, delivery date or internet confirmation). - 26 - CHIEF... -
Page 27: Exploded Drawing
EXPLODED DRAWING - 27 - CHIEF... - Page 28 - 28 - CHIEF...
- Page 29 - 29 - CHIEF...
-
Page 30: Parts List
SLIDE TRACK AXIS AIR PRESS CYLINDER CORE MIDDLE HOLLOW BOLT M5*40 INNER TUBE CAP PLASTIC BEARING FLAT WASHER SLIDE BLOCK M10*45 MOVING WHEEL BOLT TAPER CUSHION ADJUST BRACKET SCREW ST4.2*9.5 SUPPORTING SCREW ST2.9*9.5 BRACKET FLAT WASHER SCREW M5*12 - 30 - CHIEF... - Page 31 BOLT M8*80 CONTROL BOARD BOLT M8*75 FRONT ROLLER M8*40 BOLT FRONT AXIS CORE M8*20 SCREW LIGHTPOWER PART OVER LOADING PROTECTOR φ LIGHTPOWER 45*φ37*320 SENSOR WRAPPING SAWTOOTH LOCK FLAT WASHER φ8 WASHER POWER CABLE CONNECTOR REAR ROLLER - 31 - CHIEF...
- Page 32 - 32 - CHIEF...
Need help?
Do you have a question about the Chief and is the answer not in the manual?
Questions and answers