LifeSpan Chief Owner's Manual page 12

2.0.7 SPEED shortcut
2.0.7.1 When the treadmill is running, it can set up the speed function
2.0.7.2 Under the USER program edit status, it can edit the speed quickly.
2.0.8 SAFETY KEY
2.0.8.1 If you stop it at any time, all the
3. Electrify status
3.0 After start the power, "TIME"and"SPEED"window display "2006 V1.0" ，it
computer's version number, all the windows
3.1 Press"POWER" button，after a sound,"LATTICE、TIME"window display open， "Lattice"
window displays
FAST/SLOW、INCLINE UP/DOWN"button or handlebar button to adjust the weight value. Press
"ENTER" to confirm and/and then it
3.2 "SAFETY KEY"will renew from disconnection status, the same as 3.1 mentioned. When
"SAFETY KEY"is cut,"Lattice"window
the data will display 0.
3.3 To set up the weight information
it will display the last enactment value.
3.4 Open quickly
When the power
and then press "START/STOP" button directly, the computer is running and all the datas will
proceed according to the default methods.
4. Program layout
4.1 MANUAL mode
4.1.0 Press"SELECT" button first time, all the windows will lighten, "Lattice" window will display
400M raceway, the other windows will display default and press "START/STOP" to start-up.
4.1.1 Press "SELECT" button second time, "Lattice" window will display Message8， "TIME" window
will display running time, the other windows will crush out, press"SPEED FAST/SLOW" 、
"INCLINE UP/DWN"or handlebar button to revise, then press"ENTER"button to confirm and
CHIEF
key*10
data
Message1,， "TIME"window
will enter into the treadmill
has
is on, "Lattice" window
will display 0 and the treadmill stops.
will go out after 3 seconds.
displays weight value and light, press"SPEED
displays Message5，and together with 10 sounds, all
the memory function, when you open the power next time,
displays Message2，it
- 12 -
quickly.
means
not running status.
does not make any enactment
that the