Table of Contents
Advertisement
enter into the beginning status or press"START/STOP"to start-up.
4.1.2 Press"SELECT"button third time， "Lattice"window will display Message9， "DISTANCE"
window
will display running
FAST/SLOW" 、 " INCLINE UP/DOWN" or handlebar button to revise, then
to confirm and enter into the beginning status or press"START/STOP"to start-up.
4.1.3 Press "SELECT" button
window
will display running
FAST/SLOW" 、 "INCLINE UP/DWN" or handlebar button to revise, then press "ENTER" button
to confirm and enter into the beginning status or press"START/STOP"to start-up.
4.1.4 When the treadmill is not running, "ENTER"
all the windows will lighten, "Lattice" window
display default value or enactment value, press"START/STOP" button， "Lattice"window
displays
3 、2、 1 count down and together with the prompt voice, then the computer
running.
4.1.5 Time is the positive count from 0： 00， and count to 99： 59 it will retun to 0 to count. Distance
is the positive count from 0.00 and count to 99.9Km it will return to 0 to count.
Calories is the positive count from 0CAL and count to 999CAL it will return to 0 to
count.
4.1.6 When Time, Distance and Calories
it
counts
to 0, the computer will make ten sounds Bi- Bi- Bi-。 。 。 ， also the incline is for 0, the
speed
lows
4.1.7 When it is running and press "START/STOP" button， computer will stop to count
running
, the incline value and speed value is for 0, the other
window
displays
the lowest speed, the other
4.1.8 You can press"INCLINE UP/DWN、SPEED FAST/SLOW、incline/speed shortcut key,
handlebar
button*4"
4.2
PROGRAM1----PROGRAM10（P1—P10）
4.2.1 P1—P10 function operation flow are the same and the inner install program is divided into
CHIEF
distance, the other windows will crush out, press " SPEED
fourth
time, " Lattice" window will display Message10， "CALORIES"
time, the other windows will crush out, press " SPEED
down, all the data will start to positive count from the actual value.
Message4，it will press"START/STOP"again，speed will start to run from
data
will start positive or reverse count from the stopping.
to adjust the incline and speed.
to confirm
all the enactment
displays
are
for reverse count (to set up the beginning vale), when
- 13 -
press
" ENTER" button
enter
Message3，the other windows will
/data
will remain. "Lattice"
into the status,
starts
and it is not
Advertisement
Table of Contents
