Table of Contents
Advertisement
PROBLEM
1.If the plug and the line
loosen.
Treadmill
cannot start
2.Not plugged
(what dosen't plugged in?)
1.The relative line of the
control motor
abnormal.
2.Do not press START KEY.
3.
Not insert the safety pull
The treadmill
pin
can not work.
4.Motor plug is loosen or the
motor
in bad condition
5.Power or
specification is wrong.AC
（220~240V）
SENSOR do not touch well.
No speed
CHIEF
TROUBLESHOOTING GUIDE
CAUSE
1.
are
plug and the line
connected well.
in.
2.check
power switch is opened.
1check if
are/is
control motor is plugged
well.
2.
if the button is valid or not
3.
pin is plugged well
4.
bad condition
controller
5.
1.
space
and magnet.
2.
breaker
CHECKING
Check whether
the
are
whether
the line of the
start the switch to check
check if the safety pull
/test if the motor is in
check
the specification.
check
the distance and
between SENSOR
check
the wire if circuit
is
tripped.
- 18 -
CORRECTION
1.Insert the plug and the line
well.
the
2.Reset the power.
1.Insert the control motor wire.
2.Reset the START KEY to
test.
3.Insert safety pull pin.
4.Change the motor
5. Choose
the right
specification to reset the
testing.
1.Adjust the distance within
5m/m.
2.Change the wire or SENSOR
Advertisement
Table of Contents
