Maintenance And Servicing; Maintenance Instructions - LifeSpan Chief Owner's Manual

E06 System testing failure
E07 Out of safety lock
E08 24C02 message failure

MAINTENANCE INSTRUCTIONS

Reasonable cleaning/lubricating should be made to extend the life time of this unit. Performance is
maximized when the belt and mat are kept as clean as possible.
WARNING: THE MAT/DECK FRICTION MAY PLAY A MAJOR ROLE IN THE FUNCTION AND
LIFE OF YOUR TREADMILL AND THAT IS WHY WE RECOMMEND YOU CONSTANTLY
LUBRICATE THIS FRICTION POINT TO PROLONG THE USEFUL LIFE OF YOUR TREADMILL.
FAILING TO DO THIS MAY VOID YOUR WARRANTY.
WARNING: UNPLUG POWER CORD BEFORE MAINTENANCE.
WARNING: STOP TREADMILL BEFORE FOLDING.

1 Maintenance and servicing

AFTER EACH USE (DAILY)
Clean and inspect, following these steps:
CHIEF
3．Voltage is wrong
1．The machine is
interfered
2．Drivers badness
1．Safety lock badness
2．Computer badness
1．Data transfer failure
- 20 -
3．Test if the usage voltage is
measure up
1．Reset the treadmill
2．Change IGBT or change
drivers.
1．Change the safety lock
2．Test if the iron piece of the
safety lock is dropped out or
change the computer.
1． Change 24C02
IC
EEPROM